辦公椅旋轉壽命試驗機
BH-1052辦公椅旋轉壽命試驗機主要功能：
Office chair rotating life testing machine is applicable to all office chairs with casters or chair wheels. It is used to evaluate the fatigue pressure and wear ability of casters and chair frames against the back and forth movement of chairs. A load (113 kg) is placed on the seat surface, and the clamping fixture is driven by the motor and synchronous belt to make the office chair or chair frame move back and forth to evaluate the wear-resistant life of the caster. The travel, speed and times can be set. Standard: BIFMA x 5.1 Clause 17 castor / chair frame durability test with foot chair.
辦公椅旋轉壽命試驗機適用于所有帶腳輪或椅輪的辦公椅，評核腳輪及椅框對于抵受椅子前后移動所引起的疲勞壓力及磨損能力。座面放置負重（113 公斤） ,夾持夾具用電機和同步帶帶動，使辦公椅或椅框作前后往返運動,以評估腳輪之耐磨壽命 ,行程、速率及次數(shù)均可設定。標準：Bifma x 5.1
clause 17 帶腳椅的腳輪/椅框耐久性試驗。
辦公椅旋轉壽命試驗機主要技術參數(shù)：
1、驅動方式：變頻電機和同步帶
2、行程：762mm （+ 50 mm）
3、速率：8～12次/min
4、夾持具上下調節(jié)范圍：80mm～500mm
5、控制模式：PLC 和大型LCD顯示屏
6、起始點可自行調節(jié)
7、電壓：220V 單相 ，900W
配件：承重底座1個 重23公斤內分9等分， 每方格內放置一個10公斤重砝碼， 整體重量等于113 公斤。
8、底座障礙塊可以移除， 用于平滑表面無障礙塊測試。
1. Driving mode: variable frequency motor and synchronous belt
2. Stroke: 762mm (+ 50 mm)
3. Rate: 8-12 times / min
4. Upper and lower adjustment range of clamp: 80mm ～ 500mm
5. Control mode: PLC and large LCD display
6. The starting point can be adjusted by itself
7. Voltage: 220V single phase, 900W
Accessories: one load-bearing base weighs 23 kg, which is divided into 9 equal parts. A 10 kg weight weight is placed in each square, and the overall weight is equal to 113 kg.
8. The base barrier can be removed for smooth surface barrier free block testing.