助行器耐久性疲勞試驗機測試標準/輪式助行器疲勞試驗機
一，依據GB/T 14728.2-2006《雙臂操作助行器具要求和試驗方法 第2部分：輪式助行架》標準第5.12條的要求制作。本機采用數顯控制，可設置顯示行駛的速度，行駛距離，加載力采用架構加載重物，顯示加載周期。到達加載周期自動停機。It is made according to the requirements of article 5.12 of GB / T 14728.2-2006 double arm operation walking aid requirements and test methods Part 2: wheel type walking aid. The machine is controlled by digital display, which can set the display of driving speed, driving distance, loading force and load cycle. Stop automatically when the loading cycle is reached.
二、主要技術參數：
1.設備負載150kg;遞增砝碼加載，
2.
3.加載頻率：小于1HZ，1-60次/分鐘可調，
4.加載周期次數：1-999999可設置
5.速度0.4/周期。0-2公里/小時可調
6.具有停電自動保存測試記錄。
7.助行架采用框架固定。
8.傳動皮帶長寬約
9.機臺尺寸約
10.數顯儀表顯示行駛線速度，測試次數，測試頻率。
11.電源：380V，50HZ
助行器疲勞試驗機，雙臂操作助行器測試機系列
Two
3. Loading frequency: less than 1Hz, 1-60 times / min adjustable,
4. Loading cycle times: 1-999999 settable
5. Speed 0.4/cycle. 0-2 km / h adjustable
6. The test record shall be saved automatically in case of power failure.
7. The walking aid frame is fixed by frame.
8. The length and width of the drive belt are about
9. Machine size is about
10. The digital display instrument displays the traveling line speed, test times and test frequency.
11. Power supply: 380V, 50Hz
Walking aid fatigue tester, double arm operation walking aid tester series
2.如有必要,請您留下您的詳細聯系方式!